Skip to content
RGS Carpentry

Cost guide

How much do alcove units cost?

A made-to-measure alcove unit with a painted cupboard below and shelving above typically costs £1,100 to £2,200 for a single alcove in the South East, fitted and painted. A matched pair either side of a chimney breast is £2,400 to £4,500, and a full-height bookcase wall runs £2,800 to £6,000. A pair costs less than two singles because the setting out, the finishing and the painting are done once.

Get a fixed price for your alcoves

Updated . Written by RGS Carpentry, a joinery workshop in Woking, Surrey.

The figures.

Indicative 2026 prices for Surrey and the South East, including materials and fitting. Elsewhere in the UK, labour usually costs a little less.

Alcove units guide prices, 2026, Surrey and the South East
JobGuide price
Single alcove, painted cupboard and shelving£1,100 – £2,200
Matched pair, cupboards and open shelving£2,400 – £4,500
Full-height bookcase wall, floor to ceiling£2,800 – £6,000

A guide, not a quote. A real price is fixed and in writing, and comes after the room has been measured. See every figure we publish on the pricing page.

Why alcoves are rarely off the shelf

In a Victorian or Edwardian house the two recesses either side of a chimney breast are almost never the same width, never the same depth and never plumb. A bought unit sized for one leaves a gap in the other, and the gap is the first thing anyone sees.

A made-to-measure unit is scribed to the wall it meets, with the skirting returned into the cupboard and the cornice carried across, so it reads as part of the house rather than furniture parked in a recess.

What makes one alcove quote higher than another

Cupboards cost more than open shelving, and doors with drawers behind them cost more again. Shaker doors are the usual choice; panelled or glazed doors add time.

Depth matters too. A chimney breast often leaves a shallow recess, and a cupboard deep enough for a media box or vinyl may need to come forward of the breast, which then needs its own detailing.

Then there is what is in the wall. Pipework, a gas meter, sockets and old picture-rail fixings all have to be dealt with before anything goes in, and none of them is a surprise once the room has been measured.

Painted MDF, birch ply or solid timber

For painted units, MDF is genuinely the better material: stable, smooth and cheaper than solid wood. Birch ply suits a modern exposed-edge look. Solid oak or walnut shelves cost noticeably more and make sense where the grain is going to be seen.

What moves the price.

  • Whether it is shelving only, cupboards only, or both
  • Painted MDF versus hardwood or oak-faced construction
  • Whether existing skirting and cornice have to be matched and remade
  • Shelf span, which decides board thickness and whether lippings are needed
  • Lighting, sockets and cable management
  • Number of alcoves: a matched pair costs less than double a single, because the setting out is done once
  • Whether a live flue or stove is nearby and clearances have to be designed in

How to keep the cost down.

  • Do both alcoves at once. A matched pair is cheaper than two separate jobs.
  • Use open shelving above and keep cupboards to the lower section only.
  • Choose fixed shelves where you know the heights, and adjustable only where the contents will change.
  • Paint it yourself if you are confident: ask for the units primed and ready for top coats.

More on how we design, make and fit this work: alcove units in Surrey.

When not to call us

If your alcoves are genuinely square, equal and plumb — which does happen in newer houses — a good flat-pack carcass with a made-to-measure door front will get you most of the way there for a fraction of the price. Ask us at the survey and we will tell you honestly which you are dealing with.

Common questions.

Do alcove units need to be the same on both sides?
They need to look the same. The two recesses are usually different sizes, so the boxes behind are different widths, but the faces, shelf heights and door tops are set out from one line across the wall so the eye reads a matched pair.
Can alcove units go either side of a working fireplace?
Yes, but the clearances come from the appliance’s own installation instructions, not a rule of thumb. Anything combustible near a stove or open fire has to respect those distances.
Will alcove units cover the skirting board?
Done properly, no. The skirting comes off inside the alcove and is returned into the unit so the run looks continuous. Building on top of the skirting is quicker and always shows afterwards.

Tell us what you are trying to fit, and where it has to go.

Four quick questions, no essay and no obligation. We will come and measure, and you will have a drawing and a fixed price within a week.

Every enquiry answered within one working day.