Three ways to buy a fitted wardrobe
Flat-pack you fit yourself is the cheapest route by a distance. The carcasses come in fixed widths and heights, so the gaps at the ceiling and against the walls are closed with filler panels, and the result looks like furniture standing in front of a wall rather than part of the room.
National fitted-bedroom companies sell a range of door styles on factory-made carcasses in set sizes, fitted by their own teams. Prices vary a great deal with promotions and with how hard the first quote is negotiated, so compare the specification line by line rather than the headline figure.
An independent joiner draws the wardrobe to your room and builds it to fit, scribing the edges to walls, floors and ceilings that are almost never square. Per metre it costs more than flat-pack and is often closer to the national firms than people expect, because there is no showroom or sales team in the price.
What a linear metre buys
Wardrobes are priced by the metre of run along the wall, floor to ceiling. A metre is roughly two hinged doors’ width, so a four-door double wardrobe is about two metres of run, and a full wall in a larger bedroom might be three to four.
Corners add cost out of proportion to their length: two runs have to meet cleanly and the corner void needs its own answer, whether that is a blind panel, a carousel or shelving reached from one side.
Why the interior moves the price most
A drawer is a box on runners with a front, and it is the most expensive thing per cubic inch in any wardrobe. Hanging rails and fixed shelves are cheap by comparison. Two quotes for the same wall can differ by thousands simply because one has a bank of six drawers and the other has a rail.
Plan the interior around what you actually own. Long hang needs about 1,600mm clear for coats and dresses; short hang about 1,000mm, which leaves room for a second rail or drawers below. Getting this wrong is the most common reason a new wardrobe holds less than the one it replaced.
Hinged or sliding doors
Hinged doors give you the whole interior at once and suit painted shaker and slab designs. They need clear floor in front of them to open, which matters in a narrow room.
Sliding doors save that floor space but only ever show half the wardrobe at a time, and the track system is a component with its own lifespan. In a small room they are often the right call; in a room with space to open a door, most people are happier with hinges.
What moves the price.
- Run length: cost is broadly per linear metre, so a 3m wall is roughly double a 1.5m one
- Painted vs. veneered vs. solid timber, in that order of cost
- Internal specification: drawers and pull-outs cost considerably more than hanging rails and shelves
- Ceiling height, and whether the run has to follow a slope or a chimney breast
- Doors: a plain slab is the cheapest thing to make, a shaker frame with a beaded panel among the dearest
- Sprayed off site costs more in transport and making good than hand-painting costs in labour, on a small run
- Site access and whether we are working around you living there
- Whether existing built-ins have to come out, and what is behind them
How to keep the cost down.
- Keep drawers to one section and use rails and shelves elsewhere. It is the single biggest saving available.
- Choose shaker or slab doors over intricate mouldings or glazed panels.
- Fit the wardrobe before new carpet goes down, not after. The carpet is then cut to the plinth rather than the wardrobe being built over it.
- Group it with another job in the house, such as alcove units or panelling. One set-up and one decorating visit is cheaper than two.
- Clear the room before fitting day. Time spent moving furniture is time you are paying for.
More on how we design, make and fit this work: fitted wardrobes in Surrey.

